C0022
Brake Booster Solenoid
C0022 covers the solenoid valve of an electronically controllable brake booster. Patent literature shows a vacuum booster that works in two ways: by the driver's pedal in normal braking, and through a solenoid valve that changes the pressure in an auxiliary chamber so the booster applies the brakes without the pedal. NHTSA's brake study describes the conventional vacuum booster, which this valve extends, sitting ahead of the master cylinder. The module checks the coil circuit for opens, shorts and resistance out of range and whether assist follows the command. A fault removes automatic braking and can change pedal effort; the brake or ABS lamp lights. No manufacturer documents this code publicly with a retrievable bulletin.
Possible causes
- Solenoid coil open or shorted high
- Corroded connector or chafed wiring medium
- Internal booster assembly fault low
Symptoms
- Changed brake pedal effort or feel
- Noise from the brake system
- ABS or brake warning lamp on
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for C0022
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.