C001E
Right Rear Hydraulic Release Too Long
Set when the ABS modulator cannot release pressure at the right rear wheel within the expected time during a control cycle, completing the per-wheel set with C0012, C0016 and C001A. After commanding the right rear outlet valve to dump pressure the module expects wheel speed to recover and line pressure to fall; a release longer than the calibrated limit points to a sticking valve, a restricted hydraulic path or an accumulator or pump that cannot accept fluid. ABS and stability control are disabled and the ABS warning lamp is set. No manufacturer documents this code publicly; the release phase is covered by NHTSA's brake study, the accumulator limit by a patent on low-pressure accumulators.
Possible causes
- Outlet valve sticking or slow high
- Restricted hydraulic path or contaminated fluid medium
- Pump or accumulator cannot accept fluid low
Symptoms
- ABS warning lamp on
- ABS and stability control disabled
- Extended or firm pedal during hard braking
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for C001E
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.