C001A
Left Rear Hydraulic Release Too Long
Set when the ABS modulator cannot release pressure at the left rear wheel within the expected time during a control cycle, the left rear equivalent of C0012 and C0016. After the module commands the left rear outlet valve to dump pressure it expects wheel speed to recover and line pressure to fall; a release that exceeds the calibrated time limit indicates a sticking valve, a restricted hydraulic path or an accumulator or pump unable to accept fluid. ABS and stability control are disabled and the ABS warning lamp is set. No manufacturer documents this code publicly; NHTSA's study covers the release step of the ABS cycle, and a patent shows how a full low-pressure accumulator slows it.
Possible causes
- Outlet valve sticking or slow high
- Restricted hydraulic path or contaminated fluid medium
- Pump or accumulator cannot accept fluid low
Symptoms
- ABS warning lamp on
- ABS and stability control disabled
- Extended or firm pedal during hard braking
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for C001A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.