C0016
Right Front Hydraulic Release Too Long
Set when the ABS modulator cannot release pressure at the right front wheel within the expected time during a control cycle, the right front equivalent of C0012. After commanding the right front outlet valve to dump pressure the module expects wheel speed to recover and line pressure to fall; if the release exceeds the calibrated time limit it infers a sticking valve, a restricted hydraulic path or an accumulator/pump that cannot take fluid. The module disables ABS and stability control and sets the ABS warning lamp. No manufacturer documents this code publicly. A patent on ABS low-pressure accumulators shows why release can stall: once the accumulator pressure is high, fluid no longer leaves the wheel through the outlet valve as requested.
Possible causes
- Outlet valve sticking or slow high
- Restricted hydraulic path or contaminated fluid medium
- Pump or accumulator cannot accept fluid low
Symptoms
- ABS warning lamp on
- ABS and stability control disabled
- Extended or firm pedal during hard braking
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for C0016
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.