C0015
Right Front Outlet Control
Covers the right front outlet (release) solenoid valve of the ABS hydraulic modulator, the release counterpart to inlet valve C0014. It opens to dump brake fluid from the right front caliper into the low-pressure accumulator so wheel pressure can fall during an ABS or stability cycle, then closes for reapply. The module monitors the coil circuit for opens, shorts and out-of-range resistance and checks valve response. A confirmed fault disables ABS, traction and stability control and sets the ABS warning lamp while base hydraulic braking stays available. No manufacturer documents this code publicly; the inlet/outlet pair per wheel is described in NHTSA's brake safety study and in a pump patent for ABS/ESC units.
Possible causes
- Outlet valve coil open or shorted high
- Harness or connector corrosion medium
- Internal hydraulic modulator fault low
Symptoms
- ABS warning lamp on
- ABS and stability control disabled
- Normal braking retained
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for C0015
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.