OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0012

Left Front Hydraulic Release Too Long

Set when the ABS modulator cannot release pressure at the left front wheel within the expected time during a control cycle. Rather than a pure electrical fault it is a performance or plausibility code: after the module commands the left front outlet valve to dump pressure, it expects wheel speed to recover and pressure to fall; if the release takes longer than the calibrated limit the module concludes the hydraulic path is restricted, the valve is sticking or the pump/accumulator cannot accept fluid. ABS and stability control are disabled and the ABS lamp is set. No manufacturer documents this code publicly. NHTSA describes ABS control as a hold, release and reapply cycle, and a patent explains that a well-filled low-pressure accumulator can keep the outlet valves from lowering pressure as demanded.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number– / 12

Possible causes

  • Outlet valve sticking or slow high
  • Restricted hydraulic path or contaminated fluid medium
  • Pump or accumulator cannot accept fluid low

Symptoms

  • ABS warning lamp on
  • ABS and stability control disabled
  • Extended or firm pedal during hard braking

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for C0012

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication