C0010
Left Front Inlet Control
Covers the left front inlet (apply) solenoid valve of the ABS hydraulic modulator. During ABS, traction or stability control the module closes this valve to isolate the left front brake circuit from the master cylinder and hold wheel pressure, then opens it to let pressure back in. The module checks the coil for opens, shorts and out-of-range resistance and monitors valve response. GM documents code C0010 (sub-type .5A) setting in the electronic brake control module of 2018-2019 Equinox, Terrain, Envision and Canyon, where it could store falsely and was under engineering review. A fault disables ABS and related functions; the red brake or amber ABS lamp illuminates and conventional braking remains.
Possible causes
- Inlet valve coil open or shorted high
- Brake control module fault or false setting medium
- Harness or connector corrosion low
Symptoms
- ABS warning lamp on
- ABS and stability control disabled
- Normal braking retained
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for C0010
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.