C0003
TCS Control Channel B Valve 1
C0003 is the counterpart of C0001 in channel B, the second brake circuit of the modulator. A pump patent for such units shows the layout plainly: two normally open isolation valves and two normally closed priming valves, one of each per circuit, operated by the control unit alongside the apply and release valves when traction control intervenes. Valve 1 of channel B therefore matches the first valve of the other circuit; the published sources do not fix which function carries the number. A coil open or short, a current outside the expected window or a pressure that fails to follow the command sets the code. Traction and stability control are disabled and the warning lamp lights, while ordinary braking is unaffected. No manufacturer documents this code publicly.
Possible causes
- Solenoid coil open or shorted high
- Corroded or chafed wiring to the modulator medium
- Internal hydraulic modulator fault low
Symptoms
- ABS warning lamp on
- Traction and stability control disabled
- Normal braking retained without ABS
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for C0003
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.