C0002
TCS Control Channel A Valve 2
C0002 points to the second traction control valve of channel A. Together with valve 1 it forms the valve pair a TCS modulator adds to each brake circuit: an isolation valve that cuts the circuit off from the master cylinder and a priming valve that opens the path from the master cylinder to the return pump, so pressure can rise at a driven wheel while the pedal is released. The public record does not say which of the pair J2012 calls valve 2. The module flags an open or shorted coil, an implausible current or a pressure response that does not match the command. Traction and stability control are switched off and the ABS or ESC lamp comes on; foundation braking still works. No manufacturer documents this code publicly.
Possible causes
- Solenoid coil open or shorted high
- Corroded or chafed wiring to the modulator medium
- Internal hydraulic modulator fault low
Symptoms
- ABS warning lamp on
- Traction and stability control disabled
- Normal braking retained without ABS
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for C0002
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.