OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0960

Parking Assist Rear Sensor Right Middle Circuit

B0960 does not appear in the accessible J2012 lists; it is documented by GM and the GM-era Saab models as the right middle rear parking sensor. The 2011 Saab 9-5 and 9-4X list B0960 01 (short to battery), 06 (low voltage or open), 08 (invalid signal), 21 (incorrect period) and 3A (wrong part fitted); B0958, B0959 and B0961 cover the other rear sensors. The older 9-3 uses B0960 for its right centre distance sensor and checks it with reverse gear engaged and more than 9 V; on a fault the system stops measuring and mutes the warning tones. Bosch explains that such sensors emit short ultrasonic pulses and pass the echoes to a central unit, measuring up to 5.5 m. The horn relay, by contrast, is monitored by the same makers as B2750.

SystemBody
Typegeneric / SAE
GroupB0
Range / number9 / 60

Possible causes

  • Sensor face dirty, iced or covered high
  • Ultrasonic sensor defective or wrong part fitted medium
  • Bumper harness damaged after a parking knock or repair medium
  • Parking assist control module faulty low

Symptoms

  • Parking assist switches off with a message when reversing
  • No warning tones although an obstacle is close
  • Obstacles behind the car must be checked visually until repaired

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for B0960

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication