OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0950

Heated Rear Window Circuit

None of the accessible J2012 lists, OEM manuals or NHTSA bulletins mention B0950; it is therefore unverified. The title refers to the electrically heated rear window. GM-era Saab cars monitor this heater under other numbers: in the 2011 Saab 9-5 the climate control module energises the relay coil that switches battery voltage to the grid, and faults on that control line are stored as B0283. The 9-3 checks the relay output in the rear electrical centre (B0283 06 below 6 V) and the indicator lamp in the button separately (B0969 02 above 1 A). A broken grid line or a loose tab on the glass usually disables only part of the heated area, while relay or supply faults stop it entirely. The main consequence is poor rear visibility in cold or damp weather.

SystemBody
Typegeneric / SAE
GroupB0
Range / number9 / 50

Possible causes

  • Broken heater line or detached terminal tab on the glass high
  • Rear defogger relay faulty medium
  • Wire break in the tailgate or boot lid harness medium
  • Climate or body control module output faulty low

Symptoms

  • Rear window does not clear when the heater is switched on
  • Only some heater lines warm up
  • Indicator in the button does not light

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for B0950

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication