OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0920

Washer Pump Circuit

B0920 has no verifiable source: it is absent from J2012 excerpts and from all published service information. The title covers the washer fluid pump circuit. GM's 2011 Saab 9-5 lets the body control module start the pump together with low-speed wiping as soon as washing is requested; with a supply of 9 to 16 V it watches the relay control line, stores B3873 02 on a short to ground and suspends washing. Headlamp washing there is a separate circuit (B3810) and only runs with low or high beam on, then pauses for 4 wash cycles or 48 hours. The 9-3 sets B3873 06 below 6 V on its relay output. FMVSS 104 requires a windscreen washing system on passenger cars, and HELLA describes centrifugal pumps in the reservoir for such systems. Wipers: B0900, B0910.

SystemBody
Typegeneric / SAE
GroupB0
Range / number9 / 20

Possible causes

  • Washer pump motor seized, often after running dry or freezing high
  • Corroded plug at the pump in the wheel arch medium
  • Washer relay or its control line faulty medium
  • Relay driver in the body control module faulty low

Symptoms

  • No washer fluid sprays when the wash switch is used
  • Washer pump runs continuously
  • Headlamp washers inoperative as well on shared circuits

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for B0920

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication