B0910
Wiper Motor Rear Circuit
A public definition of B0910 is lacking in J2012 extracts as well as in OEM and NHTSA documents. The title refers to the rear window wiper motor circuit. On the second-generation Saab 9-3 the rear electrical centre drives it through a relay and stores B3720: 01 if more than 6 V sits on the output during activation, so the wiper does not work, and 06 if over 6 V is present with the wiper off, where a short to ground makes the wiper run constantly and an open line stops it. In Bosch's rear wiper a single arm is driven directly by a compact drive unit. TI names stall detection and low losses as key requirements for any wiper drive. Unlike the front wiper (B0900) no safety standard prescribes it, so failure is a comfort and visibility issue.
Possible causes
- Wire break in the tailgate hinge harness high
- Rear wiper motor or spindle seized by corrosion medium
- Rear wiper relay faulty medium
- Rear module relay driver faulty low
Symptoms
- Rear wiper does not run when switched on
- Rear wiper keeps running after switching off
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for B0910
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.