B0860
License Plate Lamp Circuit
B0860 is not traceable in public J2012 extracts, and no manufacturer or regulator text refers to it. The title describes the lamp lighting the rear number plate. GM's 2011 Saab 9-5 switches it through the body control module whenever parking or dipped lights are selected, logging B3883 02 for a grounded and B3883 04 for an open feed. The older Saab 9-3 uses the same number in its rear electrical centre with stated limits: an open circuit below 20 mA, a short once over 3.5 A flows for longer than 10 ms, which also cuts the output. FMVSS 108 defines the licence plate lamp and requires it on every car. A dark plate light is not a driving hazard, but it is a roadworthiness defect that police checks can pick up.
Possible causes
- Plate lamp bulb burnt out high
- Water in the lamp housing corroding contacts medium
- Wire break in the boot lid hinge area medium
- Lamp output of the body or rear module faulty low
Symptoms
- Number plate not illuminated with lights on
- Lamp warning in the display
- Plate lamp stays on permanently in some short-circuit cases
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for B0860
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.