B0851
Right Brake Lamp Circuit
Published J2012 tables skip B0851, and service literature and NHTSA filings never cite it either. The title names the right stop-lamp circuit. The GM-developed Saab 9-3 tests this lamp whenever the brake light is on and stores B3878 04 once the right lamp draws less than 50 mA; the high-mounted lamp is judged separately under B3884 with a lower limit of 20 mA. If both sides and the third lamp go dark together, the cause usually lies upstream, at the brake light switch or a shared fuse, not in one lamp circuit. For today's networked rear lamps HELLA names failed LED segments and faulty plugs as typical findings. FMVSS 108 requires working stop lamps on every car. Repair without delay; left side: B0850.
Possible causes
- Right stop-lamp bulb or LED segment failed high
- Loose or corroded plug at the right tail lamp medium
- Wire to the right tail lamp broken medium
- Lamp driver in the rear module faulty low
Symptoms
- Right brake light dark while the left one and the third lamp work
- Brake light warning in the display
- Reduced braking signal to following drivers; repair at once
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for B0851
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.