B0841
Right Rear Turn Signal Circuit
No public record of B0841 exists in J2012 lists, OEM manuals or bulletins. The title refers to the right rear indicator circuit. The second-generation Saab 9-3 logs this lamp in its rear electrical centre as B0525: under 50 mA is treated as open (04), more than 6 A for over 6 ms as a short to ground (02), after which the output is switched off. In both cases the driver sees a message and a doubled flash rate. FMVSS 108 accepts such a change in flash rate as the required failure indication. HELLA recommends checking lamp, holder and plug for corrosion and, on PWM-driven lamps, checking the PWM signal on a scope or scan tool. A dark right rear indicator means turns and lane changes go unannounced to following traffic. Left rear: B0840.
Possible causes
- Right rear indicator bulb burnt out high
- Corroded contacts in the bulb holder medium
- Pinched wire shorting to body ground medium
- Lamp driver in the rear module faulty low
Symptoms
- Indicators flash at double speed when signalling right
- Right rear indicator does not light, message in the display
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for B0841
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.