OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0840

Left Rear Turn Signal Circuit

Neither J2012 extracts nor any OEM or NHTSA publication name B0840; its use is unproven. The title concerns the left rear indicator. In the 2003–2012 Saab 9-3 the rear electrical centre supervises this lamp under the number B0530: an open lamp (04) or a short to ground (02) shows up as a warning message and the remaining indicators flashing at double speed, which is exactly the pilot-indicator behaviour FMVSS 108 permits for a failed turn lamp. HELLA notes that modern rear lamps are driven by body or lighting control units and may consist of LED segments, so diagnosis should include fault codes, connectors and the supply to the lamp unit. A failed rear indicator hides lane changes from following traffic. Right rear: B0841.

SystemBody
Typegeneric / SAE
GroupB0
Range / number8 / 40

Possible causes

  • Rear indicator bulb or LED segment failed high
  • Corroded plug or bulb carrier in the rear lamp medium
  • Wire break in the boot lid or tailgate harness medium
  • Rear electrical centre output faulty low

Symptoms

  • Indicators flash at double speed when signalling left
  • Left rear indicator dark, warning message shown
  • Lane changes not visible to following traffic; repair promptly

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for B0840

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication