OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0831

Right Front Turn Signal Circuit

B0831 has no published definition; J2012 extracts, factory literature and NHTSA records are silent on it. Its title names the right front indicator circuit. In the GM-era Saab 9-3 this lamp is checked as B0525 by the front electrical centre, with the same limits as on the left: under 50 mA means open (04), while over 6 A lasting beyond 6 ms is read as a short to ground (02) and cuts the output. The same number B0525 is reused by the rear centre for the right rear lamp, so the module reporting the code matters. FMVSS 108 makes every car carry a flasher, a pilot indicator and a hazard warning system. HELLA lists defective bulbs, corroded contacts and damaged plugs as the common culprits. Left front: B0830; right rear: B0841.

SystemBody
Typegeneric / SAE
GroupB0
Range / number8 / 31

Possible causes

  • Right front indicator bulb failed high
  • Water in the lamp housing corroding the contacts medium
  • Wire damaged after front-end repair or impact medium
  • Front electrical centre output faulty low

Symptoms

  • Right front indicator dark when signalling right
  • Changed flash rate or steady pilot light in the cluster
  • Hazard lights incomplete on the right front corner

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for B0831

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication