OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0820

Left Headlamp High Beam Circuit

B0820 is undocumented: neither open J2012 material nor factory or NHTSA papers list it. The title refers to the left main-beam output. In the second-generation Saab 9-3 the front electrical centre flags B2580 04 when the left main beam draws under 0.8 A while switched on and B2580 0B for 7.9 to 30 A. GM's 2011 Saab 9-5 works differently: both main beams are fed through one relay whose coil the body control module grounds, and if that control line is shorted to battery plus, B2580 01 is stored with both high beams off. HELLA points out that bi-xenon units form low and high beam in one module by moving a shutter, so a fault can also sit in that mechanism. FMVSS 108 requires an upper-beam indicator for the driver. Right side: B0821.

SystemBody
Typegeneric / SAE
GroupB0
Range / number8 / 20

Possible causes

  • Left high-beam bulb burnt out high
  • High-beam relay or its control line faulty medium
  • Shutter actuator in a bi-xenon module stuck medium
  • Corroded headlamp connector low

Symptoms

  • Left main beam stays dark when high beam is selected
  • Both main beams fail if the shared relay circuit is affected
  • Lamp failure message in the display

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for B0820

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication