B0811
Right Headlamp Low Beam Circuit
No J2012 excerpt or published service text uses B0811, which leaves the code undocumented. The title names the right dipped-beam circuit. In GM's 2011 Saab 9-5 the body control module powers low beam or daytime running lamps, while a separate headlamp control module stores B2699 (02 grounded, 04 open, 00 malfunction) when it sees a commanded lamp stay dark. The older 9-3 uses the same number B2699 for its right dipped beam and sets 04 below 0.8 A or 0B at 7.9–30 A, for instance after a bulb of the wrong rating has been fitted. FMVSS 108 sets the lower-beam requirements every car has to meet. A failed right dipped beam leaves the kerb side poorly lit at night and should be fixed quickly. Left side: B0810.
Possible causes
- Right low-beam bulb or LED unit failed high
- Incorrect bulb rating after a replacement medium
- Open or grounded supply wire to the headlamp medium
- Headlamp or body control module output faulty low
Symptoms
- Right dipped beam or daytime running lamp stays dark
- Lamp warning shown in the instrument cluster
- Kerb side poorly lit at night; have it repaired promptly
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for B0811
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.