B0800
Headlamp Switch Circuit
B0800 lacks any public evidence; no J2012 extract or service document mentions it. The title concerns the light switch that tells the body control module which lamps to energise. In the GM-developed Saab 9-3 the BCM checks switch positions 1 and 2 and logs B2585 05 or B2575 05 when the respective line rises above 10.2 V; dipped beam then stays on whatever the switch says. GM's 2011 Saab 9-5 compares its headlamp-on and headlamp-off inputs, stores B257A on an implausible combination and falls back to automatic headlamp control. FMVSS 108 requires every car to have a dipper switch and a high-beam telltale. Both fallbacks keep the lights usable, so the fault mostly shows as lost manual control rather than darkness.
Possible causes
- Worn or corroded contacts in the light switch high
- Switch signal wire shorted to battery voltage medium
- Loose or damaged plug behind the switch medium
- Switch input of the body control module faulty low
Symptoms
- Dipped beam stays on regardless of switch position
- Lights only work in automatic mode
- Parking lights cannot be selected separately
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for B0800
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.