OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0610

Mirror Heater Circuit

Public J2012 lists, OEM manuals and NHTSA bulletins all lack B0610; its use cannot be verified. The title describes the heating element behind the outside mirror glass. In the 2003–2012 Saab 9-3 each door module watches this load on its own: if the heater draws too much current when switched on, it stores B1640 02 and tries again only in the next drive cycle. Magna's US9481304B2 gives a typical pad of roughly 23 W (1.8 A at 13 V), often a PTC element, whose power is cut back while the car stands still. According to TI, a mirror module has to supervise both the folding motor and the heater load for faults. A dead heater only affects demisting; adjustment faults have their own codes (B0600, B0601).

SystemBody
Typegeneric / SAE
GroupB0
Range / number6 / 10

Possible causes

  • Heating pad behind the mirror glass broken or shorted high
  • Corroded plug at the mirror glass or in the mirror base medium
  • Wire chafed in the door hinge passage medium
  • Heater output of the door or body control module faulty low

Symptoms

  • Outside mirror stays fogged or iced while the rear window clears
  • Mirror glass does not warm up when the heating is switched on
  • Code returns after every restart

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for B0610

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication