OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0600

Mirror Adjustment Driver Side Circuit

B0600 is not listed in the J2012 tables that are publicly accessible, and no manufacturer explains it. The title refers to the adjustment circuit of the driver's exterior mirror, which FMVSS 111 requires the driver to be able to tilt horizontally and vertically while seated. Saab's 9-3 monitors the two mirror motors in the driver door module: B1723 01 for the left/right output shorted to battery, B1724 02 for the up/down output shorted to ground, both evaluated only while the common motor line (B1600) is fault-free. The module then retries that axis four times per driving cycle. Memory mirrors also read the glass position; Britax's US6254242B1 uses a potentiometer linked directly to the glass for that.

SystemBody
Typegeneric / SAE
GroupB0
Range / number6 / 00

Possible causes

  • Mirror adjustment motor seized by corrosion or ice high
  • Mirror wires broken in the door hinge passage medium
  • Water in the mirror housing shorting the motor or sensor medium
  • Driver door module output faulty low

Symptoms

  • Driver mirror does not move in one or both axes
  • Mirror memory position not restored
  • Rear view to the driver's side limited until adjusted by hand

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for B0600

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication