OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0580

Driver Seat Memory Module Malfunction

B0580 is absent from publicly available J2012 lists and lacks a public manufacturer definition. The title describes an internal fault of the driver seat memory module. GM's 2011 Saab 9-5 shows what such a module checks in itself: B3920 42 when its calibration was never programmed, B3920 00 when the current leaving a motor rail differs from the returning current, plus voltage faults on the rail; the module then refuses those motors, and a stored code disappears once 40 ignition cycles pass without the fault. In the Saab 9-3, B3920 01 (output above 12 V while inactive) cancels all memory functions, while a stuck memory button (B2755 01) is merely ignored. Chrysler's US4682088A keeps stored positions in non-volatile memory.

SystemBody
Typegeneric / SAE
GroupB0
Range / number5 / 80

Possible causes

  • Replacement module installed without calibration or setup medium
  • Internal electronic fault of the memory module medium
  • Liquid under the seat reaching the module medium
  • Low battery voltage or poor module ground low

Symptoms

  • Memory buttons do not recall seat or mirror positions
  • Power seat partly or completely inoperative
  • Stored positions lost after power interruption

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for B0580

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication