B0561
Driver Power Seat Up/Down Circuit
B0561 has no entry in the accessible J2012 lists and no public manufacturer definition. The title refers to the motor that raises and lowers the driver seat; Chrysler's US4682088A splits this into front and rear cushion motors with about 1.5 in of travel. In the Saab 9-3 the height motor circuit is B1765 in the driver seat module: 04 for an open output, 0B for more than 40 A; the output is shut off and retried once per ignition cycle. GM's 2011 Saab 9-5 instead tests a shared 2.5 V bias point before any seat motor runs and sets B3920 if it stays above 2.78 V or under 1.47 V for a tenth of a second, blocking every motor on that power rail. A failed height axis therefore often stops other axes too.
Possible causes
- Height motor or spindle gear seized high
- Motor wires pinched by the seat frame when lowering medium
- Short on a motor line shared with other seat axes medium
- Seat module driver stage faulty low
Symptoms
- Driver seat height cannot be adjusted
- Other seat axes may stop working as well
- Memory recall incomplete or blocked
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for B0561
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.