OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0541

Passenger Door Ajar Switch Circuit

B0541 cannot be traced in public J2012 lists or published manufacturer data. By its title it covers the ajar switch circuit of the front passenger door. Saab's 9-3 monitors that switch as B2991 in the body control module using the driver-side thresholds: 02 for a grounded line under 2.9 V, 05 for an open line or battery short over 10.2 V. Many modern doors have no separate jamb plunger; ArvinMeritor's US20030182863A1 puts the ajar switch on the latch claw, where it changes state roughly halfway between the fully latched and the safety position, so a door that only reached the safety catch still reads as ajar. A latch replacement can therefore be the fix. Driver side: B0540.

SystemBody
Typegeneric / SAE
GroupB0
Range / number5 / 41

Possible causes

  • Ajar switch inside the passenger door latch worn high
  • Door only reaching the safety catch due to misaligned striker medium
  • Switch wire open or grounded in the hinge passage medium
  • Body control module input faulty low

Symptoms

  • Passenger door reported open while driving
  • Courtesy light does not react to the passenger door
  • Alarm cannot be armed or triggers falsely

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for B0541

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication