OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0531

Passenger Door Lock Actuator Circuit

B0531 is neither in the accessible J2012 lists nor in any public manufacturer document, so the code itself cannot be verified. Its title covers the lock motor in the front passenger door. The Saab 9-3 checks that motor in the passenger door module and stores B3135 02 when the line is grounded during a lock or unlock request. In GM's 2011 Saab 9-5, by contrast, the body control module drives grouped lock and unlock lines (B3125, B3130, B3135 02) at 9–18 V; a grounded line disables the power locks; once repaired, the stored entry ages out after 50 starts. Mitsuba's US7218120B2 describes how a driver stage can be checked with a small test current for shorts to supply or ground before the motor is powered. Driver door: B0530.

SystemBody
Typegeneric / SAE
GroupB0
Range / number5 / 31

Possible causes

  • Passenger door lock motor burnt out or seized high
  • Lock motor wire chafed to ground in the door medium
  • Water ingress at the latch connector medium
  • Door or body control module output faulty low

Symptoms

  • Passenger door stays locked or unlocked while others follow
  • Whole central locking inoperative if a shared line is grounded
  • Audible click without latch movement

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for B0531

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication