B0530
Driver Door Lock Actuator Circuit
B0530 does not appear in the publicly available J2012 lists. GM names it among the circuit keywords of PIP5094 without a descriptor, and the GM-era Saab 9-3 (2003–2012) uses B0530 for something else entirely: the left turn indicator. There the front electrical centre logs B0530 04 when the lamp draws under 50 mA, and the rear centre logs B0530 02 for a grounded output, after which the indicators flash at double rate. For the driver door lock motor named in the title, the same 9-3 uses its own numbers in the driver door module, B3135 02 (motor line grounded) and B3130 02 (common line), both leaving central locking dead. HELLA lists supply, ground, broken wires and stiff lock mechanics as typical actuator faults.
Possible causes
- Lock motor in the driver door latch worn or seized high
- Wire break in the door hinge passage medium
- Stiff or contaminated latch mechanism overloading the motor medium
- Output stage of the door or body control module faulty low
Symptoms
- Driver door does not lock or unlock with remote or switch
- Other doors keep locking normally
- On a Saab 9-3 the code instead comes with a left turn signal fault
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for B0530
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- static.nhtsa.gov/odi/tsbs/2013/MC-10112857-9999.pdf
- saabwisonline.com/9-3-9440/2007/dtcs/uec/b0530-04/
- saabwisonline.com/9-3-9440/2007/dtcs/rec/b0530-02/
- saabwisonline.com/9-3-9440/2007/dtcs/ddm/b3135-02/
- saabwisonline.com/9-3-9440/2007/dtcs/ddm/b3130-02/
- hella.com/techworld/uk/technical/sensors-and-actuators/central-locking-system/