OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0520

Passenger Door Open Switch

No accessible J2012 list contains B0520, and its meaning is not published by any carmaker. The code exists at GM: PIP5094, a circuit-testing bulletin for 2014 and earlier GM vehicles, lists it as a keyword but leaves it undefined. The title describes the switch reporting that the front passenger door is opening. GM's 2011 Saab 9-5 monitors the matching right front exterior handle switch as B1474 02 and disables that handle once the line is grounded or stays closed beyond 60 s. Toyota's EP2372055A1 adds a plausibility check for intermittent switch faults: if a smart-key unlock is followed by the key being found inside the cabin without any door-open signal, the switch is judged faulty. Driver side: B0510.

SystemBody
Typegeneric / SAE
GroupB0
Range / number5 / 20

Possible causes

  • Passenger door switch contacts worn, greased up or frozen high
  • Wire break in the passenger door hinge passage medium
  • Exterior handle switch shorted by water ingress medium
  • Body or keyless entry module input faulty low

Symptoms

  • Passenger door opening not detected by interior light or alarm
  • Passenger exterior handle ignored by the keyless system
  • Auto-lock may relock the car with the key inside

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for B0520

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication