OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0510

Driver Door Open Switch

B0510 is missing from the publicly available J2012 lists, and no manufacturer defines it in accessible documents. GM does list B0510 among the circuit DTC keywords of bulletin PIP5094 (2014 and earlier cars and light trucks), but without a descriptor. The title points to the switch that tells the body electronics the driver door is being opened. In GM's 2011 Saab 9-5 the comparable input is the driver exterior handle switch, coded B3849 02: if the keyless entry module sees that line grounded or closed for over 180 s, it ignores the handle. Toyota's EP2372055A1 shows why such inputs matter: a door courtesy switch that fails to report an opening can let auto-lock trap the key inside. The passenger door counterpart is B0520.

SystemBody
Typegeneric / SAE
GroupB0
Range / number5 / 10

Possible causes

  • Driver door switch worn, dirty or stuck in one position high
  • Wire broken or chafed in the driver door hinge passage medium
  • Moisture or corrosion at the switch connector medium
  • Input stage of the body or keyless entry module faulty low

Symptoms

  • Interior light stays off when the driver door is opened
  • Keyless opening at the driver handle does not respond
  • Door-open message or chime missing or shown permanently

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for B0510

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication