OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0501

Passenger Power Window Circuit Malfunction

For B0501 neither the reachable J2012 lists nor any manufacturer offer a definition, so the code is unverified. The title points to the front passenger window circuit. Saab's 9-3 passenger door module uses B3205/B3210 for its own motor paths and B3932 when it measures current while the motor should be idle; one-touch travel then stops. GM's 2011 9-4X sets B3210 for the passenger motor if its compatibility code does not match the BCM. Honda's US7145299B2 shows the classic layout in which the driver's master switch commands the passenger door over a single line, so the fault may sit in the master switch, the line or the local switch. Without working reversal, FMVSS 118's 100 N limit rules out automatic closing. The passenger switch circuit is B0247.

SystemBody
Typegeneric / SAE
GroupB0
Range / number5 / 01

Possible causes

  • Passenger window motor worn or internally faulty high
  • Passenger button in the driver's master switch faulty medium
  • Wiring broken in the passenger door hinge passage medium
  • Replacement motor not coded or not matched to the body module low

Symptoms

  • Passenger window dead from both the local and the master switch
  • Window works only while the button is held
  • Window moves slowly or stops partway

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for B0501

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication