OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0500

Driver Power Window Circuit Malfunction

No public J2012 list includes B0500, and no carmaker documents it, so the code is not verified. The title concerns the driver's power window circuit. Saab handles this under its own numbers: in the 9-3 (2003–2012) the driver door module logs B3205/B3210 for an open, shorted or overloaded down or up path and retries on every new drive cycle; on the 2011 9-5 the BCM sets B3205 for an incompatible, internally failed or unlearned motor, the latter without one-touch travel. In US6906487B2 an H-bridge reads motor current for pinch detection. FMVSS 118 requires a window that closes by itself to reverse before 100 N, so a fault may block automatic closing. Switch faults belong to B0245, the down path alone to B0252.

SystemBody
Typegeneric / SAE
GroupB0
Range / number5 / 00

Possible causes

  • Window motor worn, sluggish or with a dead spot high
  • Wires broken in the rubber boot between body and door medium
  • Regulator or glass runs bind, motor overloads medium
  • End positions lost after battery disconnection, relearn needed low

Symptoms

  • Driver window does not move or only in one direction
  • One-touch up/down and pinch protection out of action
  • Window stops or reverses partway without reason

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for B0500

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication