OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0490

Display Backlight Circuit

B0490 is not listed in any accessible J2012 source, nor does a carmaker's literature cover it, so public proof is lacking. The title covers the backlight of a display, today usually LED strings fed by a boost driver. TI's LP8866-Q1 and LP8872-Q1 flag open strings, shorted LEDs and LED shorts to ground and report them to the host; TI adds that quick short-to-ground detection avoids glare that could blind the driver at night. GM's 2011 9-4X logs B1289 when the radio finds the PWM brightness line to the rear-seat screens open or shorted 400 ms after enabling it, and the screens then fall back to a fixed brightness. A dark screen whose picture is still faintly visible in sunlight points here rather than to B0455.

SystemBody
Typegeneric / SAE
GroupB0
Range / number4 / 90

Possible causes

  • LED string or single LED of the backlight failed high
  • Backlight driver or its boost stage defective medium
  • Brightness control line open or shorted low

Symptoms

  • Screen dark although content is faintly visible in bright light
  • Brightness cannot be adjusted or follows no day/night change
  • Uneven, flickering or partly dark backlight

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for B0490

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication