B0445
USB Hub Fault
B0445 does not appear in any reachable J2012 list and is not described by a manufacturer, so its existence is unproven. A USB hub in the car splits one host port of the head unit across several sockets for media and charging. Because a loose cable can touch battery voltage, TI's TPD3S714-Q1 shields the bus supply and both data lines against shorts up to 18 V in hubs and head units, and the TPS254900A-Q1 turns its switch off quickly on such a short so that the upstream converter and the hub data lines survive. TI's charging-port overview bundles power conversion, USB-PD and this protection for media hubs. A hub fault leaves sockets without data or charge, or lets a phone connect only now and then. Bus faults of the head unit itself are separate U codes.
Possible causes
- Socket damaged or contaminated, short between pins high
- Cable between hub and head unit loose or chafed medium
- Hub electronics or protection switch failed medium
- Connected device or cable draws too much current low
Symptoms
- USB stick or phone not recognised
- Socket charges but transfers no data, or vice versa
- Phone projection drops out repeatedly
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for B0445
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.