B0342
HVAC Heated Seat Passenger Circuit
No accessible J2012 list or manufacturer source mentions B0342; it matches B0337 in substance. As with the driver side, the HVAC prefix implies a climate module that also drives the passenger seat heater. In Saab's 9-3 that module reads a right seat temperature sensor too: B2172 02 below 0.2 V or B2173 05 above 4.8 V (tested only while the cabin is warmer than −10 °C) shuts the right heater down, while B2434 06 flags an open or grounded heater output. US5229579A puts a thermistor next to the heating element so the controller can regulate and spot faults. A failed sensor can therefore disable a heating mat that is itself intact.
Possible causes
- Right seat temperature sensor open or shorted high
- Passenger heating mat broken medium
- Connector under the passenger seat loose medium
- Climate module seat heater driver or sensor input faulty low
Symptoms
- Passenger seat heating switches off immediately
- Passenger seat stays cold
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for B0342
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.