B0341
HVAC Heated Seat Driver Circuit
B0341 is not backed by any known J2012 list or carmaker text, and it covers the same ground as B0335. The HVAC prefix fits cars whose climate control module also runs the seat heaters. Saab's 9-3 is one: its climate module drives the left seat heater and reads a seat temperature sensor; B1927 02 (input below 0.2 V) switches the left heater off, and B2429 06 reports an open element. US6252208B1 shows such a set-up, where an NTC sensor in the seat forms a voltage divider whose tap the controller reads to regulate heating current. The mats are the same as with a separate seat heating module; what differs is the module that owns the output and sets the code.
Possible causes
- Driver heating mat open circuit high
- Seat temperature sensor shorted or open so heating is blocked medium
- Long harness from climate module to seat damaged at the seat rail medium
- Seat heater output in the climate control module failed low
Symptoms
- Driver seat heating dead while climate control works
- Heating starts but stops after a short time
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for B0341
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.