B0339
Rear Seat Heater Circuit
B0339 shows up neither in the public code lists nor in published service material. Rear seat heating is an option on larger cars; the GM-built 2011 Saab 9-4X with heated rear seats has a dedicated control module behind the rear backrest. It feeds both mats through a common supply, regulates by switching their ground with PWM and checks current and voltage every 10 s: B2425/B2430 0D mean element resistance too high, 0B/0E too much current or too little resistance. Each rear seat also carries an NTC sensor (B1925/B2170), and B2345 13 reports the shared disable line. US5229579A shows why such controllers shut off on a short or an open circuit.
Possible causes
- Heating mat in a rear seat cushion broken high
- Connector damaged when the rear seat was folded or removed medium
- Rear seat heating control module or its supply faulty medium
- Seat temperature sensor implausible so heating is disabled low
Symptoms
- One or both rear seat heaters stay cold
- Rear seat heating indicator flashes or goes out
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for B0339
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- saabwisonline.com/9-4x/2011/8-body/seats/fault-diagnosis-diagnostic-trouble-codes/dtc-b2425-or-b2430-with-ka6
- saabwisonline.com/9-4x/2011/8-body/seats/fault-diagnosis-diagnostic-trouble-codes/dtc-b2345-with-ka6
- saabwisonline.com/9-4x/2011/8-body/seats/fault-diagnosis-diagnostic-trouble-codes/dtc-b1925-or-b2170-with-ka6
- patents.google.com/patent/US5229579A/en