B0337
Passenger Seat Heater Circuit
There is no public trace of B0337 in J2012 lists or factory data; its subject repeats B0342. It covers the passenger seat heating mat and its feed. Because that seat is often empty, a fault may go unnoticed for a long time. Saab's 9-3 climate module reports B2433 01 when the right heater is shorted to battery voltage and B2434 06 for an open or grounded circuit; GM's 2011 Saab 9-5 uses B2430 0B/0D/0E. Chrysler's bulletin 08-049-14 covered both front seats (B1096 on the right). US6252208B1 shows how a control circuit combines heating current and an NTC seat sensor; a broken element or feed simply leaves the passenger seat cold.
Possible causes
- Heating wire in the passenger cushion or backrest broken high
- Connector under the passenger seat kicked loose or corroded medium
- Damage during work on the occupant detection mat in the same cushion low
- Heater output in the controlling module defective low
Symptoms
- Passenger seat heating does not warm up
- Heating switches off shortly after activation
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for B0337
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- saabwisonline.com/9-3-9440/2007/dtcs/acc/b2433-01/
- saabwisonline.com/9-3-9440/2007/dtcs/acc/b2434-06/
- saabwisonline.com/9-5-9650/2011/8-body/seats/fault-diagnosis-diagnostic-trouble-codes/dtc-b2425-or-b2430-with-memory
- static.nhtsa.gov/odi/tsbs/2014/MC-10137035-9999.pdf
- patents.google.com/patent/US6252208B1/en