B0330
HVAC Rear Blower Motor Circuit
B0330 cannot be found in accessible J2012 lists or carmaker sources, and it overlaps B0184 in content. The rear blower moves conditioned air to the back rows, often as a second fan in a rear duct (US6915650B2) or a separate rear unit with its own speed control (US4949779A). GM's 2011 Saab 9-5 and 9-4X log the circuit as B0208: the climate module sends a PWM speed command to an auxiliary blower control module that converts it into 2–13 V at the motor; 01 means that line is always high, 06 always low or floating, and the rear blower stops. Typical faults are a seized motor, a burnt speed controller or a broken command wire.
Possible causes
- Rear blower speed controller or resistor burnt out high
- Rear blower motor seized or brushes worn medium
- Speed command wire open or shorted between modules medium
- Rear blower fuse or supply relay failed low
Symptoms
- No air from the rear vents
- Rear blower runs only at one speed or cannot be switched off
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for B0330
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- saabwisonline.com/9-5-9650/2011/8-body/automatic-climate-control-acc/fault-diagnosis-diagnostic-trouble-codes/dtc-b0208
- saabwisonline.com/9-4x/2011/8-body/automatic-climate-control-acc/fault-diagnosis-diagnostic-trouble-codes/dtc-b0208
- patents.google.com/patent/US6915650B2/en
- patents.google.com/patent/US4949779A/en
- hella.com/techworld/us/passenger-car-parts/thermal-management/interior-blower-resistors/