B0322
Driver Seat Tilt Position Sensor
B0322 lacks any public definition, either in J2012 lists or from a manufacturer. The title describes the sensor reporting the cushion tilt of the power driver seat, normally made by raising or lowering the front edge. Saab's 9-3 driver seat module calls it the tilt position sensor and stores B3923: 01 above 7 ± 0.2 V, 02 when shorted to ground, 04 for an open line and 29 when no pulses arrive while the engine runs. Memory recall then stops and the end-stop calibration of the tilt motor is lost. US4682088A measures front and rear cushion height with potentiometers, while US6320341B1 restores the front cushion portion by pulse counting. Fore-aft feedback is B0310.
Possible causes
- Sensor in the cushion tilt motor failed high
- Tilt motor wiring pinched in the seat frame medium
- Shared sensor supply shorted or open medium
- Seat module input stage defective low
Symptoms
- Cushion tilt not restored by memory recall
- Tilt adjustment jerks or stops before the end
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for B0322
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.