B0310
Driver Seat Position Sensor Circuit
For B0310 there is neither a J2012 list entry nor a known manufacturer description. The title refers to the position feedback of the power driver seat. GM's 2011 Saab 9-5 uses Hall sensors built into each seat motor; the memory module feeds them 12 V and counts their pulses (0–65,535) to know where the seat is; its codes are B1825, B2355, B2365 and B2375. Saab's 9-3 files the fore-aft sensor as B2375: 04 above 0.5 V for an open line, 29 when no pulses arrive. Then memory recall stops and end-stop learning is lost. US5751129A names potentiometers, Hall sensors and commutator pulses as the usual principles. Manual seat movement normally still works.
Possible causes
- Hall sensor inside a seat motor failed high
- Wiring under the seat pinched by the rails or pulled off high
- Sensor supply or ground circuit open or shorted medium
- Seat memory module input fault low
Symptoms
- Memory buttons do not recall stored seat positions
- Seat moves jerkily or stops short of its end position
- Easy-entry function does not move the seat back
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for B0310
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.