OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0300

HVAC Evaporator Temperature Sensor Circuit

Public code lists do not show B0300, and factory documentation for it is missing too. The evaporator temperature sensor is a thermistor on or just behind the evaporator core; the climate controller cycles or throttles the compressor with it so that the core does not ice up (US6427465B1, US4326386A). Saab's 9-3 uses its own numbers: B0521 02 below 0.2 V and B0522 05 above 4.8 V at the module input, after which the outside temperature serves as a substitute value. HELLA reports that a badly sealed or drifting sensor can freeze the evaporator and choke the airflow. A circuit fault therefore tends to cost cooling comfort rather than leave the car without air.

SystemBody
Typegeneric / SAE
GroupB0
Range / number3 / 00

Possible causes

  • Evaporator thermistor open, shorted or out of tolerance high
  • Sensor pushed out of the core or poorly sealed after service medium
  • Connector at the HVAC housing loose or corroded by condensate medium
  • Sensor input in the climate control module faulty low

Symptoms

  • Cooling weak or fluctuating, especially in hot weather
  • Airflow drops after a long drive because the evaporator ices up

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for B0300

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication