OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0288

HVAC A/C Pressure Sensor Circuit

A search found B0288 in no J2012 list and in no carmaker's service data; it stays unconfirmed. The refrigerant pressure sensor it names sits on the high-pressure line; its signal decides whether the compressor may run and how fast the cooling fan turns. On most cars the engine controller reads it and stores P0530–P0533. Saab's 9-3 with Trionic 8, for example, sets P0532 below 0.25 V and P0533 above 4.2 V, each for over 1 s with the engine running above −7 °C, and then cuts the A/C relay. Patent US9259992B2 routes the sensor to the engine module in the same way, and US5623835A uses it to drive the fan. A body code would only be used where the climate module reads the sensor itself.

SystemBody
Typegeneric / SAE
GroupB0
Range / number2 / 88

Possible causes

  • Refrigerant pressure sensor failed or signal drifting high
  • Sensor connector near the condenser corroded by road spray medium
  • 5 V reference, ground or signal wire open or shorted medium
  • Very low refrigerant charge giving an implausible reading low

Symptoms

  • Air conditioning blows warm because the compressor is disabled
  • Radiator fan runs constantly or at the wrong speed

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for B0288

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication