OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0278

HVAC Defrost Door Circuit

B0278 appears neither in J2012 tables nor in factory service material, so its existence is open. By its title it covers the electrical side of the defrost door actuator, the flap that routes air to the windscreen. Saab's 9-3 climate module stores the matching fault as B0240 06 (actuator circuit open or grounded) and B0241 01 (short to battery or excessive current); both lead to wrong air distribution. Hitachi's US5181553A drives the defroster door with a dedicated actuator motor, and MOTOR magazine describes how such actuators are tested electrically. A dead circuit leaves the door parked, so demisting may be weak or air may blow at the screen constantly. Door position problems without an electrical fault fit B0205.

SystemBody
Typegeneric / SAE
GroupB0
Range / number2 / 78

Possible causes

  • Defrost door actuator motor open or shorted internally high
  • Actuator wiring under the dashboard damaged or connector loose medium
  • Door or linkage seized so the motor draws excessive current low
  • Actuator driver in the climate control module failed low

Symptoms

  • Windscreen clears slowly because little air reaches it
  • Air keeps blowing at the windscreen whatever mode is selected

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for B0278

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication