OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0274

Trunk Lid Release Switch Circuit

Nothing public confirms B0274 – the publicly available J2012 tables skip it and no maker explains it. The title refers to the switch the driver or a passer-by uses to release the boot lid electrically. Saab treats the button separately in the 9-3: the driver door module sets B2730 61 when the boot button stays active for more than 20 s, after which the lid will not open. Downstream, Saab and GM log the release output itself (9-3 B3265, 9-5 2011 B3265 02 for a grounded relay control line). Remote-release patents such as US4979384A and US3917330A show the basic layout: a switch energises a solenoid or motor in the latch. A switch-circuit fault leaves the lid shut or, if shorted, can pop it open unexpectedly.

SystemBody
Typegeneric / SAE
GroupB0
Range / number2 / 74

Possible causes

  • Exterior release button corroded or full of water and dirt high
  • Wires broken in the flexible boot lid hinge loom medium
  • Interior release button held or jammed by trim medium
  • Door or body module input reading the switch defective low

Symptoms

  • Boot lid cannot be opened with the button, only by key or remote
  • Lid unlatches without anyone pressing the button

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for B0274

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication