OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0272

Power Door Lock Switch Circuit

Neither the reachable J2012 lists nor any carmaker's documents mention B0272, which leaves the code unproven. Its title covers the interior central-locking button in general, without naming a door. Saab logs a held button in the 9-3 driver door module as B3270 61: if the input stays low, the module waits until the key is released and pressed again before acting. In US6365986B1 such a manual switch inside the door is one of two inputs, next to the key-cylinder contact, from which the control unit drives the lock motors. US6157090A codes each switch position with its own resistor, so the body module reads the position as a current level. The door-specific switch codes are B0265 and B0270; actuator faults are B0530 ff.

SystemBody
Typegeneric / SAE
GroupB0
Range / number2 / 72

Possible causes

  • Central-locking button mechanically stuck or contacts worn high
  • Switch wire shorted to ground or open between switch and module medium
  • Spilled liquid or condensation in the switch panel low
  • Door or body control module misreads the switch input low

Symptoms

  • Interior lock button does not lock or unlock the doors
  • Locks cycle unexpectedly or only react to the remote key

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for B0272

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication