OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0270

Passenger Door Lock Switch Circuit

Public evidence for B0270 is lacking: it is absent from every publicly available J2012 list, and no manufacturer describes it. The title points to the lock/unlock rocker in the front passenger door. Saab, for instance, files that switch in the 9-3 (2003–2012) under its own number B3270: when the passenger door module reads a grounded switch line, the button is ignored and central locking only responds to the remaining controls. In the active-low input of US5619075A a pressed switch pulls the module input to ground. A circuit fault therefore means the module sees a button held permanently, never pressed or giving an implausible level. Remote key and driver switch normally keep working; the driver-side switch has its own code, B0265.

SystemBody
Typegeneric / SAE
GroupB0
Range / number2 / 70

Possible causes

  • Lock rocker in the passenger door worn, sticking or contaminated high
  • Switch signal wire chafed to ground or broken in the door hinge passage medium
  • Water ingress or corrosion at the door trim switch connector medium
  • Door or body control module input stage faulty low

Symptoms

  • Passenger door lock button has no effect on central locking
  • Doors lock or unlock by themselves when the switch line is shorted
  • Remote key and driver switch still lock the car normally

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for B0270

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication