B0265
Driver Door Lock/Unlock Switch Circuit
Nothing in the publicly available J2012 sources or carmaker literature mentions B0265, so it is unverifiable; related codes are B0270 and B0272. The lock/unlock button in the driver's door tells the body or door module to run all lock motors, as HELLA's overview of central locking describes. In the Sumitomo patent US6365986B1 the switch pulls one of two inputs, each held high by a pull-up, to ground, and the module acts on the high-to-low edge rather than the level; after a reset it assumes the switch is pressed so that no second, false lock cycle follows. A circuit fault therefore means a line stuck low, which can block other lock commands or cycle the locks, or an open line that makes the button dead.
Possible causes
- Lock/unlock button sticking or shorted by moisture in the door panel high
- Switch wires broken in the boot between body and driver's door medium
- Input stage in the body or door module damaged low
Symptoms
- Doors cannot be locked or unlocked with the interior button
- Locks cycle on their own or ignore the remote key
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for B0265
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.