OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0263

HVAC Air Mix Door 2 Circuit

B0263 shares the fate of its sibling B0258: no publicly available J2012 source lists it and no maker describes it. The second blend door usually serves the passenger side or the rear zone. Saab's 9-5 and 9-4X service data, which follow GM's Global A scheme, file the right temperature actuator under B0418 and the rear one under B0428, each a stepper motor checked for shorts to voltage and for opens. Some designs save the second motor: Denso's US7793706B2 drives the front door and a pair of rear doors from one servo through cams and a rocker, so a single failure would affect both zones. When the second door's circuit fails, the passenger or rear side stays at a fixed temperature while the driver side keeps regulating.

SystemBody
Typegeneric / SAE
GroupB0
Range / number2 / 63

Possible causes

  • Passenger-side or rear blend actuator failed high
  • Wiring to the second actuator open or shorted, often near the centre console medium
  • Shared linkage or door shaft broken, overloading the drive low

Symptoms

  • Passenger side or rear outlets stay at one temperature whatever is set
  • Noticeable temperature difference between left and right outlets

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for B0263

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication