OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0250

HVAC Air Temperature Internal Sensor Circuit

None of the publicly available J2012 lists contain B0250. On the Saab 9-3 the number marks an actuator fault instead: B0250 06 means the floor door motor circuit is open or grounded, which upsets air distribution, while B0251 01 is the B+ short. Taken by its title, the code is about the cabin temperature sensor, which also has the code B0160. These sensors are NTC elements whose resistance falls as they warm, as HELLA documents for its own air temperature sensor. To measure real cabin air rather than still air behind the dash, TGK's patent US6622924B2 pulls air past the thermistor with a small brushless fan whose rotation is reported on its own pin. If the circuit fails, automatic climate control works with a substitute value and the cabin ends up too warm or too cold.

SystemBody
Typegeneric / SAE
GroupB0
Range / number2 / 50

Possible causes

  • Sensor plug or wiring behind the dashboard open or shorted to ground high
  • NTC element in the sensor damaged medium
  • Aspirator fan seized or its intake grille blocked, so the reading lags behind cabin temperature low

Symptoms

  • Automatic climate control holds the wrong cabin temperature
  • Blower speed and outlet temperature no longer adapt as the cabin warms up

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for B0250

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication